Tachometer checking type only.
Verification: These wires will rest at ground and register positive voltage when the lock and unlock davidson harley manual timing adjustment switches are activated.
3 PIN door lock harness, continued RED - Lock Output (-) green - Unlock Output (-) RED/black - 2nd Door Unlock Output Reverse Polarity (5-Wire Door locks) and Reverse Polarity with 2-step Unlock All Door Lock and Unlock: Locate the lock / unlock wire.
Verification: This wire will register positive voltage (POS) when the door is opened and the interior light.Valet mode: (System is in windows 2008 r2 rds cal crack Disarm Mode) The valet switch allows you to temporarily bypass all alarm dungeons and dragons daggerdale patch function, eliminating the need to hand your transmitter to parking attendants or garage mechanics.Note: If no remotes are programmed during step 7, the system will automatically transition into the Factory Keyless Upgrade Mode - blue Note: Security with Transmitters Mode enables all of the devices security functionality by use of aftermarket transmitters.Pathway illumination: When receiving an unlock /disarm signal, this feature will turn the parking lights ON for 30 seconds and for 10 seconds upon the lock signal.An additional spdt relay (not supplied) is required.Enter the vehicle and turn the ignition switch to the 'ON position.Anti Car-Jack Mode Activated Check Depending on the usage, the remote batteries should be changed at least once a year in the one way remote and once every 3-8 months for the twoway remote.4 Pin Data Bus Interface Port: (Brown Connector) This 4 pin port is used for Flashlogic Door Lock and Transponder Databus Interfaces to communicate with the vehicle's Databus.Locate the vehicles trunk release wire at the trunk release switch.Extended Locks.9 sec.Ignition Controlled Locks ON OFF.The siren, horn, parking lights, and dome light will turn on alerting of an intrusion for 30 seconds.(The engine will stay running.).Press button to move to the next sub-option or go back to the main menu.Verification: This wire will register at positive voltage and register ground when the horn switch is pressed.Hidden alarm function: Silent Alarm button first; within 3 seconds press the button to activate Press the the hidden alarm function.If the any one of the sensors or detectors is still active, the alarm system will sound a maximum of 3 times of 30 seconds cycles.The system will respond with 1 chirp.The LED will remain on as long as the system is in 'valet mode'.Hold button for 2 seconds to activate anti carjacking functions.
If the Ignition Controlled Locks option is set to On: Doors lock when all doors are closed and the ignition is turned.
Turbo charge mode: Turbo charger mode keeps the engine running after arriving at your destination for a programmable period of 1, 3 or 5 minutes, This allows the vehicles engine time to conveniently cool down the turbo after you have left the vehicle.
To stop the alarm, press the trunk.
The security system will remain in this temporary state for as long as you wish.